Otherwise in the event that we're using GSO without sticky sockets, we
pass garbage OOB buffers to sendmmsg, making a EINVAL, when GSO doesn't
set its header.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Otherwise GRO gets enabled on Android, but the conn doesn't use it,
resulting in bundled packets being discarded.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
StdNetBind probes for UDP GSO and GRO support at runtime. UDP GSO is
dependent on checksum offload support on the egress netdev. UDP GSO
will be disabled in the event sendmmsg() returns EIO, which is a strong
signal that the egress netdev does not support checksum offload.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 052af4a without UDP GSO or GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-10.00 sec 9.85 GBytes 8.46 Gbits/sec 1139 3.01 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 9.85 GBytes 8.46 Gbits/sec 1139 sender
[ 5] 0.00-10.04 sec 9.85 GBytes 8.42 Gbits/sec receiver
The second result is with UDP GSO and GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-10.00 sec 12.3 GBytes 10.6 Gbits/sec 232 3.15 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 12.3 GBytes 10.6 Gbits/sec 232 sender
[ 5] 0.00-10.04 sec 12.3 GBytes 10.6 Gbits/sec receiver
Reviewed-by: Adrian Dewhurst <adrian@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Replace the src storage inside StdNetEndpoint with a copy of the raw
control message buffer, to reduce allocation and perform less work on a
per-packet basis.
Signed-off-by: James Tucker <james@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Looks like a simple copy&paste error.
Fixes: 9e2f386 ("conn, device, tun: implement vectorized I/O on Linux")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In 9e2f386 ("conn, device, tun: implement vectorized I/O on Linux"), the
Linux-specific Bind implementation was collapsed into StdNetBind. This
introduced a race on StdNetEndpoint from getSrcFromControl() and
setSrcControl().
Remove the sync.Pool involved in the race, and simplify StdNetBind's
receive path to allocate StdNetEndpoint on the heap instead, with the
intent for it to be cleaned up by the GC, later. This essentially
reverts ef5c587 ("conn: remove the final alloc per packet receive"),
adding back that allocation, unfortunately.
This does slightly increase resident memory usage in higher throughput
scenarios. StdNetBind is the only Bind implementation that was using
this Endpoint recycling technique prior to this commit.
This is considered a stop-gap solution, and there are plans to replace
the allocation with a better mechanism.
Reported-by: lsc <lsc@lv6.tw>
Link: https://lore.kernel.org/wireguard/ac87f86f-6837-4e0e-ec34-1df35f52540e@lv6.tw/
Fixes: 9e2f386 ("conn, device, tun: implement vectorized I/O on Linux")
Cc: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This commit updates StdNetBind.BatchSize() to return 1 instead of
IdealBatchSize for non-Linux platforms. Non-Linux platforms do not
yet benefit from values > 1, which only serves to increase memory
consumption.
Reviewed-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This commit re-slices received control messages in StdNetBind to the
value the OS reports on a successful read. Previously, the len of this
slice would always be srcControlSize, which could result in control
message values leaking through a sync.Pool round trip. This is
unlikely with the IP_PKTINFO socket option set successfully, but
should be guarded against.
Reviewed-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If RIO is unavailable, NewWinRingBind() falls back to StdNetBind.
StdNetBind uses x/net/ipv{4,6}.PacketConn for sending and receiving
datagrams, specifically via the {Read,Write}Batch methods.
These methods are unimplemented on Windows and will return runtime
errors as a result. Additionally, only Linux benefits from these
x/net types for reading and writing, so we update StdNetBind to fall
back to the standard library net package for all platforms other than
Linux.
Reviewed-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There's not really a use at the moment for making this configurable, and
once bind_windows.go behaves like bind_std.go, we'll be able to use
constants everywhere. So begin that simplification now.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Implement TCP offloading via TSO and GRO for the Linux tun.Device, which
is made possible by virtio extensions in the kernel's TUN driver.
Delete conn.LinuxSocketEndpoint in favor of a collapsed conn.StdNetBind.
conn.StdNetBind makes use of recvmmsg() and sendmmsg() on Linux. All
platforms now fall under conn.StdNetBind, except for Windows, which
remains in conn.WinRingBind, which still needs to be adjusted to handle
multiple packets.
Also refactor sticky sockets support to eventually be applicable on
platforms other than just Linux. However Linux remains the sole platform
that fully implements it for now.
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Accept packet vectors for reading and writing in the tun.Device and
conn.Bind interfaces, so that the internal plumbing between these
interfaces now passes a vector of packets. Vectors move untouched
between these interfaces, i.e. if 128 packets are received from
conn.Bind.Read(), 128 packets are passed to tun.Device.Write(). There is
no internal buffering.
Currently, existing implementations are only adjusted to have vectors
of length one. Subsequent patches will improve that.
Also, as a related fixup, use the unix and windows packages rather than
the syscall package when possible.
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This does bind_std only; other platforms remain.
The remaining alloc per iteration in the Throughput benchmark
comes from the tuntest package, and should not appear in regular use.
name old time/op new time/op delta
Latency-10 25.2µs ± 1% 25.0µs ± 0% -0.58% (p=0.006 n=10+10)
Throughput-10 2.44µs ± 3% 2.41µs ± 2% ~ (p=0.140 n=10+8)
name old alloc/op new alloc/op delta
Latency-10 854B ± 5% 741B ± 3% -13.22% (p=0.000 n=10+10)
Throughput-10 265B ±34% 267B ±39% ~ (p=0.670 n=10+10)
name old allocs/op new allocs/op delta
Latency-10 16.0 ± 0% 14.0 ± 0% -12.50% (p=0.000 n=10+10)
Throughput-10 2.00 ± 0% 1.00 ± 0% -50.00% (p=0.000 n=10+10)
name old packet-loss new packet-loss delta
Throughput-10 0.01 ±82% 0.01 ±282% ~ (p=0.321 n=9+8)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There are more places where we'll need to add it later, when Go 1.18
comes out with support for it in the "net" package. Also, allowedips
still uses slices internally, which might be suboptimal.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Instead of hard-coding exactly two sources from which
to receive packets (an IPv4 source and an IPv6 source),
allow the conn.Bind to specify a set of sources.
Beneficial consequences:
* If there's no IPv6 support on a system,
conn.Bind.Open can choose not to return a receive function for it,
which is simpler than tracking that state in the bind.
This simplification removes existing data races from both
conn.StdNetBind and bindtest.ChannelBind.
* If there are more than two sources on a system,
the conn.Bind no longer needs to add a separate muxing layer.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
This makes it clearer that they are fresh on each attempt,
and avoids the bookkeeping required to clearing them on failure.
Also, remove an unnecessary err != nil.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Jason A. Donenfeld
Jordan Whited
James Tucker
Josh Bleecher Snyder
Josh Bleecher Snyder