SDV is using own CL.EXE which returns error code 2 when code analysis
is turned on. However, we need code analysis results for DVL.
While we could use a new "ReleaseSDV" configuration, we don't really
require limited code analysis in Release builds, as long as we address
all full code analysis warnings in Debug builds.
To make DVL happier, an intermediate Release build was injected with
code analysis turned on.
Signed-off-by: Simon Rozman <simon@rozman.si>
Makes builds more reproducable, as we can do our next release using the
EWDK, an all-in-one ISO of build tools from Microsoft.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The initial adapter state (including media connection) is provided by
the NDIS_MINIPORT_ADAPTER_GENERAL_ATTRIBUTES.
Additional NdisMIndicateStatusEx() call seems excessive.
Signed-off-by: Simon Rozman <simon@rozman.si>
All was well with NetSetupAnticipatedInstanceId, until a bug crept into
recent Windows builds that caused old GUIDs not to be properly removed,
resulting in subsequent adapter creations to fail, because NetSetup
AnticipatedInstanceId considers it fatal when the target GUID
already exists, even if in diminished form.
The initial solution was to detect cruft, and then steal a
TrustedInstaller token and sleuth around the registry cleaning things
up. The horror!
Uncomfortable with this, I reopened IDA and had a look around with fresh
eyes, three years after the original discovery of NetSetupAnticipated
InstanceId. There, I found some interesting behavior in
NetSetupSvcDeviceManager::InstallNetworkInterfaces, which amounts to
something like:
if (IsSet("RetiredNetCfgInstanceId") {
if (IsSet("NetSetupAnticipatedInstanceId")
DeleteAdapter(GetValue("RetiredNetCfgInstanceId"));
else
Set("NetSetupAnticipatedInstanceId", GetValue("RetiredNetCfgInstanceId"));
Delete("RetiredNetCfgInstanceId");
}
CreateAdapter = TRUE;
if (IsSet("NetSetupAnticipatedInstanceId")) {
Guid = GetValue("NetSetupAnticipatedInstanceId");
if (AdapterAlreadyExists(Guid))
CreateAdapter = FALSE;
else
SetGuidOfNewAdapter(Guid);
Delete("NetSetupAnticipatedInstanceId");
} else if (IsSet("SuggestedInstanceId")) {
Guid = GetValue("SuggestedInstanceId");
if (!AdapterAlreadyExists(Guid))
SetGuidOfNewAdapter(Guid);
Delete("SuggestedInstanceId");
}
Thus, one appealing strategy would be to set both NetSetupAnticipated
InstanceId and RetiredInstanceId to the same value, and let the service
handle deleting the old one for us before creating the new one.
However, the cleanup of the old adapter winds up being quasi-
asynchronous, and thus we still wind up in the CreateAdapter = FALSE
case.
So, the remaining strategy is to simply use SuggestedInstanceId instead.
This has the behavior that if there's an adapter already in use, it'll
use a new random GUID. The result is that adapter creation won't fail.
That's not great, but the docs have always made it clear that
"requested" is a best-effort sort of thing. Plus, hopefully the creation
of the new adapter will help nudge the bug a bit and cleanup the old
cruft. In some ways, transitioning from our old strategy of "cudgel the
registry until we get the GUID we want" to "ask politely and accept no
for an answer" is a disappointing regression in functionality. But it
also means we don't need to keep crazy token stealing code around, or
fish around in the registry dangerously. This probably also increases
the likelihood that an adapter will be created during edge cases, which
means fewer errors for users, which could be a good thing. On the
downside, we have the perpetual tensions caused by a system that now
"fails open" instead of "fails closed". But so it goes in Windows land.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Prior to the conversion, LastError is ERROR_SUCCESS, so move the logging
to be after the conversion.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There's no longer a need to do this for every API call. This only exists
now for the pnp guid reuse workaround hack.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
IoAllocateMdl allocates a different size structure depending on the
bottom in-page bits of the address. By passing null, it assumes that the
address is aligned within the page, which it might not be. Fix this by
passing the eventual virtual address to the allocation function so that
the right amount is always allocated.
Reported-by: Oleksandr Muzychuk <oleksandr.muzychuk@apriorit.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Should NDIS version check fail the DriverEntry() bailed out without
releasing the TunDispatchSecurityDescriptor.
Signed-off-by: Simon Rozman <simon@rozman.si>
ROOT/NET/000X could have been claimed by a different driver, so we want
to double check.
Link: https://lists.zx2c4.com/pipermail/wireguard/2021-May/006716.html
Reported-by: Piotr Sobczak <piotrs@glosol.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
While it does make sense to make readers unblock by setting the read
event on teardown, this is something that consumers of the library
should do _before_ calling EndSession, not something that makes sense
for the library to do itself. The reason is that, in the hypothetical
case in which this makes sense, immediately after unblocking the reader
via SetEvent, the function goes on to free all of the memory that that
reader might want to use. So, rather, the proper shutdown flow is from
the application side, and looks like:
Closing = true;
SetEvent(WintunGetReadWaitEvent());
WaitForReadersToReturn();
WintunEndSession();
Alternatively, rather than using WaitForSingleObject on the read event,
consumers can WaitForMultipleObjects and include a shutdown event, which
is what the example code does.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Recent versions of Windows fail to tidy up, causing issues when reusing
GUIDs. Check to see if a GUID might be orphaned, and forcibly clear out
the registry state if so.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Otherwise we fail to remove the zombie adapter, and then the problem
repeats itself. Note that this is part of a larger issue of clearing out
bad GUIDs in NetSetup2 on recent Windows builds
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Wondering, why WinDbg is refusing to load symbols for wintun.sys
recently...
By default, building puts .pdb files to the output folder. Next to the
final binaries: wintun.sys, wintun.dll, example.exe... Wait?! But the
wintun.pdb from wintun.dll overwrites the wintun.pdb from wintun.sys
then.
Signed-off-by: Simon Rozman <simon@rozman.si>
The time stamping with Inf2Cat never makes the wintun output really "up-
to-date". This keeps triggering wintun project rebuilds over and over
again. Including all the projects depending on wintun.
Thou, the api project really depends on the driver built by wintun
project, those needless driver rebuilds are utterly annoying.
To be correct, the amd64 api project also depends on the arm64 api
project - a dependency which cannot be described using .sln. So, one way
or another, a developer must build projects inside the .sln in a
specific order.
Another solution would be to split the solution file (pun intended). One
.sln for driver, another for the api and example projects. Then open the
one the developer is focused on.
Signed-off-by: Simon Rozman <simon@rozman.si>
While the Wintun driver is typically released only at <major>.<minor>
milestones, the wintun.dll did see some intermediate releases.
To make MSI logic correctly decide to upgrade local wintun.dll file, the
version inscribed in wintun.dll file resources should increment in those
intermediate releases. MSI ignores file timestamps. One could use
REINSTALLMODE=emus Installer property to force copying wintun.dll when
its version doesn't change. But REINSTALLMODE applies to all files in
the MSI session and would be an additional requirement when authoring
MSI packages with wintun.dll.
Bumping only the final ZIP filename version is not sufficient.
Therefore, a <major>.<minor> or <major>.<minor>.<build> versioning is
introduced. Furthermore, we no longer distinguish between WintunVersion
and WintunVersionStr. All our releases used strictly numeric
<major>.<minor> notation, making WintunVersion and WintunVersionStr
always the same.
When the driver didn't change, just bump the version in wintun.proj and
run `msbuild wintun.proj /t:Zip` to rebuild the wintun.dll and make the
new ZIP file.
Signed-off-by: Simon Rozman <simon@rozman.si>
