Otherwise, for lots of apps, the dialog shows before they're enumerated,
and the button text never gets set.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The TV theme has been kept as-is since Material You guidance around this
is a bit scarce at the moment.
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
This check was added in 3c31c340d8 when the kernel module loader was
introduced into the app lifecycle, to avoid attempting to start a root shell
twice. When the module loader was removed in a03ad51622, this flag
was accidentally left in when it should have been deleted.
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
Add a new feature to import a tunnel from a saved QR image, this feature
integrates into 'import from file' flow, however adds a condition, if
file is an image, attempt to parse it as QR image file.
My use case for this feature, is to allow easier sharing of tunnels to
family. Scanning QR code is ok when you have an external display to
show it, but if you sent QR code to someone, there is no way to import
it in the app. If you share a config file, that becomes way harder for
a non-technical person to import as now they need to find a file with
that name in the file picker etc etc, Where the images are very visible
in the file picker, and user can easily recognize it for import.
Testing:
- Click "+" blue button, try to import a valid `.conf` file - the
'original' file flow should not be affected
- Click "+" blue button, try to import a valid QR code image - if QR
code was parsed, then a new tunnel will be added.
- Click "+" blue button, try to import an invalid QR code image - Error
message will be shown
Signed-off-by: Nikita Pustovoi <deishelon@gmail.com>
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
Nathan Chance dropped the ball repeatedly and never maintained this in a
consistent way that anybody could use. With Android 12 out now, just
drop it all together. A bummer, but I don't see much of a choice.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
wg-quick has supported this for a while, but not the config layer, and
not the Go backend, so wire this all up.
Requested-by: Alexis Geoffrey <alexis.geoffrey97@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This has several problems: 1) it blocks the main thread; 2) it doesn't
distinguish between a permanent error and a transient one; 3) the 10
seconds is hard coded; 4) there's no way for the user to cancel it.
We'll have to improve this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Some folks use chromebooks, which don't have rear cameras.
Reported-by: Jay Tuley <jay.tuley@ekonbenefits.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If we're horizontally scrolling, it makes sense to fill rows before
columns. But if it all fits in one page and we don't need to scroll
horizontally, it looks ridiculous. So, in this case, rearrange the tiles
so that it appears to fill columns before rows. But we don't want things
suddenly jumping around, so actually, keep the same ordering as
rows-before-columns, but add invisible spaces after certain items, so
that the fill area makes it look as though it's columns-before-rows.
This winds up being much more visually pleasing.
We do this by figuring out this kind of transformation:
If we convert this matrix:
0 3 6
1 4 _
2 5 _
To this one:
0 2 4 6
1 3 5 _
_ _ _ _
For a given index, how many spaces are under it? This changes depending
on how many total are in a grid. Going from 3x3 to 4x3, for example, we
have:
count == 12, index =
count == 11, index = 10
count == 10, index = 7,9
count == 9, index = 4,6,8
count == 8, index = 1,3,5,7
count == 7, index = 1,3,5,6!
count == 6, index = 1,3,4!,5!
count == 5, index = 1,2!,3!,4!
count == 4, index = 0!,1!,2!,3!
count == 3, index = 0!,1!,2!
count == 2, index = 0!,1!
count == 1, index = 0!
count == 0, index =
The '!' means two blanks below, no '!' means one blank below, and no
mention means no blanks below.
This commit adds code to compute such a table on the fly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Fragment scopes get cancelled when the fragment goes away, but we don't
actually want to cancel an in-flight transition in that case. Also,
before when the fragment would cancel, there'd be an exception, and the
exception handler would call Fragment::getString, which in turn called
requireContext, which caused an exception. Work around this by using the
`activity ?: Application.get()` idiom to always have a context for
strings and toasts.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is kind of ridiculous, since the items own state should clearly be
queryable, but it doesn't appear to be the case here, so just shuffle it
around into kotlin and back.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
java.lang.IllegalStateException:
at android.app.ContextImpl.startServiceCommon (ContextImpl.java:1720)
at android.app.ContextImpl.startService (ContextImpl.java:1675)
at android.content.ContextWrapper.startService (ContextWrapper.java:669)
at com.wireguard.android.backend.GoBackend.startVpnService (GoBackend.java:4)
at com.wireguard.android.backend.GoBackend.setStateInternal (GoBackend.java:4)
at com.wireguard.android.backend.GoBackend.setState (GoBackend.java:2)
at com.wireguard.android.model.TunnelManager$setTunnelState$2$1.invokeSuspend (TunnelManager.java:6)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith (BaseContinuationImpl.java:2)
at kotlinx.coroutines.DispatchedTask.run (DispatchedTask.java:2)
at kotlinx.coroutines.scheduling.CoroutineScheduler.runSafely (CoroutineScheduler.java)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.executeTask (CoroutineScheduler.java:7)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.runWorker (CoroutineScheduler.java:7)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.run (CoroutineScheduler.java:7)
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
java.lang.IllegalStateException:
at androidx.fragment.app.Fragment.requireContext (Fragment.java:17)
at com.wireguard.android.fragment.BaseFragment$setTunnelStateWithPermissionsResult$1.invokeSuspend (BaseFragment.java:4)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith (BaseContinuationImpl.java:2)
at kotlinx.coroutines.UndispatchedCoroutine.afterResume (UndispatchedCoroutine.java:19)
at kotlinx.coroutines.AbstractCoroutine.resumeWith (AbstractCoroutine.java:13)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith (BaseContinuationImpl.java:2)
at kotlinx.coroutines.UndispatchedCoroutine.afterResume (UndispatchedCoroutine.java:19)
at kotlinx.coroutines.AbstractCoroutine.resumeWith (AbstractCoroutine.java:13)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith (BaseContinuationImpl.java:2)
at kotlinx.coroutines.DispatchedTask.run (DispatchedTask.java:2)
at android.os.Handler.handleCallback (Handler.java:790)
at android.os.Handler.dispatchMessage (Handler.java:99)
at android.os.Looper.loop (Looper.java:164)
at android.app.ActivityThread.main (ActivityThread.java:7025)
at java.lang.reflect.Method.invoke (Method.java)
at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run (RuntimeInit.java:441)
at com.android.internal.os.ZygoteInit.main (ZygoteInit.java:1408)
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
GlobalScope has numerous problems[1] that make it unfit for
use in most applications and making it behave correctly requires
an excessive amount of verbosity that's alleviated simply by using
any other scope. Since we run multiple operations in the context
of the application's lifecycle, introduce a new scope that is created
when our application is, and cancelled upon its termination.
While at it, make the scope default to Dispatchers.IO to reduce pressure
on the UI event loop. Tasks requiring access to the UI thread appropriately
switch context making the change completely safe.
1: https://medium.com/@elizarov/the-reason-to-avoid-globalscope-835337445abc
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
onSelectedTunnelChanged is already queueing us to Dispatchers.Main
(rather than Dispatchers.Main.immediate, which would crash, but why?),
so avoid the extra trip through the event loop by toggling the selected
tunnel right away.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Setting the correct value for the allowedAuthenticators field lets the library correctly detect this by itself as verified on an API 21 emulator
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
Layouts in differing configurations must agree on their root tags, so we give
both copies of main_activity the same root ID, and adjust the check for
two-pane layout to simply test for nullability. This also changes the inset
dispatch code to use ViewCompat and WindowInsetsCompat since they will adjust
insets based on the SDK level allowing us to abstract away that concern.
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
The stats might become null between these two checks, when a tunnel
flips off, resulting in a null pointer dereference:
at com.wireguard.android.model.ObservableTunnel.getStatisticsAsync (ObservableTunnel.java:103)
at com.wireguard.android.fragment.TunnelDetailFragment.updateStats (TunnelDetailFragment.java:108)
at com.wireguard.android.fragment.TunnelDetailFragment.access$updateStats (TunnelDetailFragment.java:27)
at com.wireguard.android.fragment.TunnelDetailFragment$onResume$1.run (TunnelDetailFragment.java:74)
at java.util.TimerThread.mainLoop (TimerThread.java:562)
at java.util.TimerThread.run (TimerThread.java:512)
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When tunnel deletion is triggered we don't bother with animation theatrics
because the resulting Snackbar needs this fab to be its anchor, which it can't
do if its outside the screen or busy animating.
Signed-off-by: Harsh Shandilya <me@msfjarvis.dev>
