linux-hwg/linux.install
Thomas Bächler 22fbe6b63f Commit preliminary PKGBUILD and files for the new 'linux' package.
The PKGBUILD and .install file still need some overhaul, most of the
renames have been done in the build() and the first package_() function.
2011-07-18 12:30:49 +00:00

148 lines
5.9 KiB
Plaintext

# arg 1: the new package version
# arg 2: the old package version
KERNEL_NAME=
KERNEL_VERSION=2.6.39-ARCH
post_install () {
# updating module dependencies
echo ">>> Updating module dependencies. Please wait ..."
/sbin/depmod $KERNEL_VERSION
# generate init ramdisks
echo ">>> MKINITCPIO SETUP"
echo ">>> ----------------"
echo ">>> If you use LVM2, Encrypted root or software RAID,"
echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
echo ">>> More information about mkinitcpio setup can be found here:"
echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
echo ""
echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
/sbin/mkinitcpio -p kernel26${KERNEL_NAME}
}
post_upgrade() {
pacman -Q grub &>/dev/null
hasgrub=$?
pacman -Q grub2 &>/dev/null
hasgrub2=$?
pacman -Q lilo &>/dev/null
haslilo=$?
# reminder notices
if [ $haslilo -eq 0 ]; then
echo ">>>"
if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then
echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting."
else
echo ">>> You appear to be using the LILO bootloader. You should run"
echo ">>> 'lilo' before rebooting."
fi
echo ">>>"
fi
if grep "^[^#]*[[:space:]]/boot" /etc/fstab 2>&1 >/dev/null; then
if ! grep "[[:space:]]/boot" /etc/mtab 2>&1 >/dev/null; then
echo "WARNING: /boot appears to be a seperate partition but is not mounted"
echo " This is most likely not what you want. Please mount your /boot"
echo " partition and reinstall the kernel unless you are sure this is OK"
fi
fi
if [ "`vercmp $2 2.6.13`" -lt 0 ]; then
# important upgrade notice
echo ">>>"
echo ">>> IMPORTANT KERNEL UPGRADE NOTICE"
echo ">>> -------------------------------"
echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!"
echo ">>> If you still use DevFS, please make the transition to uDev before"
echo ">>> rebooting. If you really need to stay with DevFS for some reason,"
echo ">>> then you can manually downgrade to an older version:"
echo ">>>"
echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz"
echo ">>>"
echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your"
echo ">>> IgnorePkg list in /etc/pacman.conf"
echo ">>>"
echo ">>> (NOTE: The following portion applies to uDev users as well!)"
echo ">>>"
echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not"
echo ">>> be able to boot! Change your root= parameter to use the classic"
echo ">>> naming scheme."
echo ">>>"
echo ">>> EXAMPLES:"
echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3"
echo ">>> - change root=/dev/md/0 to root=/dev/md0"
echo ">>>"
fi
# generate new init ramdisk
if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
echo ">>> --------------------------------------------------------------"
echo ">>> | WARNING: |"
echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|"
echo ">>> | Please change to Mkinitcpio setup. |"
echo ">>> --------------------------------------------------------------"
echo ">>>"
fi
# updating module dependencies
echo ">>> Updating module dependencies. Please wait ..."
/sbin/depmod $KERNEL_VERSION
echo ">>> MKINITCPIO SETUP"
echo ">>> ----------------"
if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
echo ">>> Please change your bootloader config files:"
echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf"
echo "------------------------------------------------"
echo "| - initrd26.img to kernel26${KERNEL_NAME}.img |"
echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |"
echo "------------------------------------------------"
fi
if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
echo ""
echo ">>> New PATA/IDE subsystem - EXPERIMENTAL"
echo ">>> ----------"
echo ">>> To use the new pata drivers, change the 'ide' hook "
echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS="
echo ">>> The new system changes: /dev/hd? to /dev/sd?"
echo ">>> Don't forget to modify GRUB, LILO and fstab to the"
echo ">>> new naming system. "
echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8"
echo ""
echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT"
echo "----------"
echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf"
echo ">>> the 'ata_piix' module will be used."
echo ">>> This may cause your devices to shift names, eg:"
echo ">>> - IDE: devices from hd? to sd?"
echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port."
echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix"
echo ""
fi
echo ">>> If you use LVM2, Encrypted root or software RAID,"
echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
echo ">>> More information about mkinitcpio setup can be found here:"
echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
echo ""
echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
/sbin/mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below
and are using an Intel chipset, append 'earlymodules=piix' to the
kernel commandline"
else
/sbin/mkinitcpio -p kernel26${KERNEL_NAME}
fi
if [ "`vercmp $2 2.6.21`" -lt 0 ]; then
echo ""
echo "Important ACPI Information:"
echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized."
echo ">>> The modules are located at:"
echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi"
echo ">>> For more information about ACPI modules check this wiki page:"
echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'"
fi
}
post_remove() {
rm -f /boot/kernel26${KERNEL_NAME}.img
rm -f /boot/kernel26${KERNEL_NAME}-fallback.img
}